Enum A 

pub enum A {}

Sub-block A.

Trait Implementations

impl Dma<SAI1, A> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, A> for DMA2_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, A> for DMA2_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl FsPin<SAI1, A> for PA9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl FsPin<SAI1, A> for PB9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl FsPin<SAI2, A> for PB12

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl FsPin<SAI2, A> for PC0

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl MclkPin<SAI1, A> for PA3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MclkPin.

impl MclkPin<SAI1, A> for PB8

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MclkPin.

impl MclkPin<SAI2, A> for PB14

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MclkPin.

impl MclkPin<SAI2, A> for PC6

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MclkPin.

impl SckPin<SAI1, A> for PA8

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin.

impl SckPin<SAI1, A> for PB10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin.

impl SckPin<SAI2, A> for PB13

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin.

impl SdPin<SAI1, A> for PA10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdPin.

impl SdPin<SAI1, A> for PC1

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdPin.

impl SdPin<SAI1, A> for PC3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdPin.

impl SdPin<SAI2, A> for PB15

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdPin.

impl SubBlockInstance for A