Struct TIM18 

pub struct TIM18 { /* private fields */ }

TIM18 peripheral

Implementations

impl TIM18

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl BasicInstance for TIM18

impl BasicNoCr2Instance for TIM18

impl Clone for TIM18

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for TIM18

impl CoreInstance for TIM18

type UpdateInterrupt = TIM18

Update Interrupt for this timer.

type Word = u16

Amount of bits this timer has.

fn regs() -> *mut ()

Registers for this timer.

impl Debug for TIM18

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for TIM18

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl PeripheralType for TIM18

impl RccPeripheral for TIM18

impl UpDma<TIM18> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl UpDma<TIM18> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as UpDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel