Struct MDF1 

pub struct MDF1 { /* private fields */ }

MDF1 peripheral

Implementations

impl MDF1

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl CckPin<MDF1> for PB6

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CckPin.

impl CckPin<MDF1> for PE2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CckPin.

impl CkiPin<MDF1> for PB3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkiPin.

impl CkiPin<MDF1> for PD10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkiPin.

impl CkiPin<MDF1> for PE11

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkiPin.

impl CkiPin<MDF1> for PE3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkiPin.

impl CkiPin<MDF1> for PE7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkiPin.

impl CkiPin<MDF1> for PE9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CkiPin.

impl Clone for MDF1

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl Copy for MDF1

impl Debug for MDF1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for MDF1

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl Instance for MDF1

impl PeripheralType for MDF1

impl RccPeripheral for MDF1

impl RxDma<MDF1, Flt0> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt0> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt1> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt2> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt3> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt4> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<MDF1, Flt5> for HPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl SdiPin<MDF1> for PB0

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdiPin.

impl SdiPin<MDF1> for PB7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdiPin.

impl SdiPin<MDF1> for PD12

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdiPin.

impl SdiPin<MDF1> for PD2

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdiPin.

impl SdiPin<MDF1> for PE10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdiPin.

impl SdiPin<MDF1> for PE12

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdiPin.

impl SdiPin<MDF1> for PE8

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdiPin.

impl SdiPin<MDF1> for PF10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdiPin.