Embassy

Flavors

embassy_stm32::peripherals

Struct I2C4

pub struct I2C4 { /* private fields */ }

Expand description

I2C4 peripheral

Implementations§

impl I2C4

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

impl Instance for I2C4

type EventInterrupt = I2C2_3_4

Interrupt for this peripheral.

type ErrorInterrupt = I2C2_3_4

Interrupt for this peripheral.

impl Peripheral for I2C4

type P = I2C4

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton. Read more

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>
where Self: 'a,

Convert a value into a PeripheralRef. Read more

impl RxDma<I2C4> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RxDma<I2C4> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl SclPin<I2C4> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SclPin

impl SdaPin<I2C4> for PB7

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdaPin

impl TxDma<I2C4> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl TxDma<I2C4> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl RccPeripheral for I2C4

Auto Trait Implementations§

impl Freeze for I2C4

impl RefUnwindSafe for I2C4

impl Send for I2C4

impl Sync for I2C4

impl Unpin for I2C4

impl UnwindSafe for I2C4

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = Infallible

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.