Embassy
embassy-stm32

Crates

git

Versions

stm32u585oi

Flavors

embassy_stm32::peripherals

Struct TIM1

Source 
pub struct TIM1 { /* private fields */ }
Expand description

TIM1 peripheral

Implementations§

Source§

impl TIM1

Source

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

Source§

impl AdvancedInstance1Channel for TIM1

Source§

type CommunicationInterrupt = TIM1_TRG_COM

Communication interrupt for this timer.
Source§

type BreakInputInterrupt = TIM1_BRK

Break input interrupt for this timer.
Source§

impl BreakInput2Pin<TIM1> for PA11

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInput2Pin
Source§

impl BreakInputPin<TIM1> for PA6

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH10

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH11

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH12

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH13

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH14

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH15

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch1Dma<TIM1> for GPDMA1_CH9

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH10

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH11

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH12

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH13

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH14

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH15

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch2Dma<TIM1> for GPDMA1_CH9

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh2Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH10

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH11

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH12

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH13

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH14

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH15

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch3Dma<TIM1> for GPDMA1_CH9

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh3Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH10

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH11

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH12

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH13

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH14

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH15

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Ch4Dma<TIM1> for GPDMA1_CH9

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh4Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl Channel1ComplementaryPin<TIM1> for PA7

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1ComplementaryPin<TIM1> for PB13

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1ComplementaryPin<TIM1> for PE8

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin
Source§

impl Channel1Pin<TIM1> for PA8

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin
Source§

impl Channel1Pin<TIM1> for PE9

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin
Source§

impl Channel2ComplementaryPin<TIM1> for PB0

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin
Source§

impl Channel2ComplementaryPin<TIM1> for PB14

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin
Source§

impl Channel2ComplementaryPin<TIM1> for PE10

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2ComplementaryPin
Source§

impl Channel2Pin<TIM1> for PA9

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel2Pin
Source§

impl Channel3ComplementaryPin<TIM1> for PB1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3ComplementaryPin
Source§

impl Channel3ComplementaryPin<TIM1> for PB15

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3ComplementaryPin
Source§

impl Channel3Pin<TIM1> for PA10

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel3Pin
Source§

impl Channel4ComplementaryPin<TIM1> for PC5

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4ComplementaryPin
Source§

impl Channel4Pin<TIM1> for PA11

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel4Pin
Source§

impl CoreInstance for TIM1

Source§

const BITS: TimerBits = TimerBits::Bits16

Amount of bits this timer has.
Source§

type UpdateInterrupt = TIM1_UP

Update Interrupt for this timer.
Source§

fn regs() -> *mut ()

Registers for this timer. Read more
Source§

impl ExternalTriggerPin<TIM1> for PA12

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin
Source§

impl ExternalTriggerPin<TIM1> for PE7

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as ExternalTriggerPin
Source§

impl GeneralInstance1Channel for TIM1

Source§

type CaptureCompareInterrupt = TIM1_CC

Capture compare interrupt for this timer.
Source§

impl GeneralInstance2Channel for TIM1

Source§

type TriggerInterrupt = TIM1_TRG_COM

Trigger event interrupt for this timer.
Source§

impl Peripheral for TIM1

Source§

type P = TIM1

Peripheral singleton type
Source§

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton. Read more
Source§

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>
where Self: 'a,

Convert a value into a PeripheralRef. Read more
Source§

impl AdvancedInstance2Channel for TIM1

Source§

impl AdvancedInstance4Channel for TIM1

Source§

impl BasicInstance for TIM1

Source§

impl BasicNoCr2Instance for TIM1

Source§

impl GeneralInstance4Channel for TIM1

Source§

impl RccPeripheral for TIM1

Auto Trait Implementations§

§

impl Freeze for TIM1

§

impl RefUnwindSafe for TIM1

§

impl Send for TIM1

§

impl Sync for TIM1

§

impl Unpin for TIM1

§

impl UnwindSafe for TIM1

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.