embassy-stm32

Crates

git

Versions

stm32u585zi

Flavors

Struct LPUART1

Source
pub struct LPUART1 { /* private fields */ }
Expand description

LPUART1 peripheral

Implementations§

Source§

impl LPUART1

Source

pub unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

Source§

impl Clone for LPUART1

Source§

fn clone(&self) -> Self

Returns a copy of the value. Read more
1.0.0 · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more
Source§

impl CtsPin<LPUART1> for PA6

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin
Source§

impl CtsPin<LPUART1> for PB13

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin
Source§

impl CtsPin<LPUART1> for PG5

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CtsPin
Source§

impl DePin<LPUART1> for PB1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin
Source§

impl DePin<LPUART1> for PB12

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin
Source§

impl DePin<LPUART1> for PG6

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as DePin
Source§

impl Instance for LPUART1

Source§

type Interrupt = LPUART1

Interrupt for this peripheral.
Source§

impl RtsPin<LPUART1> for PB1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin
Source§

impl RtsPin<LPUART1> for PB12

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin
Source§

impl RtsPin<LPUART1> for PG6

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RtsPin
Source§

impl RxDma<LPUART1> for GPDMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH10

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH11

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH12

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH13

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH14

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH15

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for GPDMA1_CH9

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for LPDMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for LPDMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for LPDMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxDma<LPUART1> for LPDMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asRxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl RxPin<LPUART1> for PA3

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin
Source§

impl RxPin<LPUART1> for PB10

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin
Source§

impl RxPin<LPUART1> for PC0

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin
Source§

impl RxPin<LPUART1> for PG8

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as RxPin
Source§

impl TxDma<LPUART1> for GPDMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH10

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH11

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH12

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH13

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH14

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH15

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH4

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH5

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH6

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH7

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH8

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for GPDMA1_CH9

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for LPDMA1_CH0

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for LPDMA1_CH1

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for LPDMA1_CH2

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxDma<LPUART1> for LPDMA1_CH3

Source§

fn request(&self) -> Request

Get the DMA request number needed to use this channel asTxDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.
Source§

impl TxPin<LPUART1> for PA2

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin
Source§

impl TxPin<LPUART1> for PB11

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin
Source§

impl TxPin<LPUART1> for PC1

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin
Source§

impl TxPin<LPUART1> for PG7

Source§

fn af_num(&self) -> u8

Get the AF number needed to use this pin as TxPin
Source§

impl Copy for LPUART1

Source§

impl PeripheralType for LPUART1

Source§

impl RccPeripheral for LPUART1

Auto Trait Implementations§

Blanket Implementations§

Source§

impl<T> Any for T
where T: 'static + ?Sized,

Source§

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more
Source§

impl<T> Borrow<T> for T
where T: ?Sized,

Source§

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more
Source§

impl<T> BorrowMut<T> for T
where T: ?Sized,

Source§

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more
Source§

impl<T> CloneToUninit for T
where T: Clone,

Source§

unsafe fn clone_to_uninit(&self, dst: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)
Performs copy-assignment from self to dst. Read more
Source§

impl<T> From<T> for T

Source§

fn from(t: T) -> T

Returns the argument unchanged.

Source§

impl<T, U> Into<U> for T
where U: From<T>,

Source§

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

Source§

impl<T, U> TryFrom<U> for T
where U: Into<T>,

Source§

type Error = Infallible

The type returned in the event of a conversion error.
Source§

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.
Source§

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

Source§

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.
Source§

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.