Embassy

Flavors

Skip to main content

LPDMA1

embassy_stm32::peripherals

Struct LPDMA1

pub struct LPDMA1 { /* private fields */ }

Expand description

LPDMA1 peripheral

Implementations§

impl LPDMA1

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

§Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations§

impl Clone for LPDMA1

fn clone(&self) -> Self

Returns a duplicate of the value. Read more

1.0.0 (const: unstable) · Source§

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source. Read more

impl Copy for LPDMA1

impl Debug for LPDMA1

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter. Read more

impl Format for LPDMA1
where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl PeripheralType for LPDMA1

impl RccPeripheral for LPDMA1

impl Trigger<LPDMA1> for EXTI0_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for EXTI1_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for EXTI2_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for EXTI3_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for EXTI4_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for TAMP_TRG1

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for TAMP_TRG2

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for TAMP_TRG3

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for LPTIM1_CH1

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for LPTIM1_CH2

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for LPTIM3_CH1

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for LPTIM4_OUT

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for COMP1_OUT

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for COMP2_OUT

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for RTC_ALRA_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for RTC_ALRB_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for RTC_WUT_TRG

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for ADC4_AWD1

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for LPDMA_CH0_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for LPDMA_CH1_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for LPDMA_CH2_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for LPDMA_CH3_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for GPDMA_CH0_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for GPDMA_CH1_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for GPDMA_CH4_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for GPDMA_CH5_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for GPDMA_CH6_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for GPDMA_CH7_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for GPDMA_CH12_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for GPDMA_CH13_TC

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for TIM2_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Trigger<LPDMA1> for TIM15_TRGO

fn signal(&self) -> u8

Get the signal number needed to use this trigger as Trigger. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

Auto Trait Implementations§

impl Freeze for LPDMA1

impl RefUnwindSafe for LPDMA1

impl Send for LPDMA1

impl Sync for LPDMA1

impl Unpin for LPDMA1

impl UnsafeUnpin for LPDMA1

impl UnwindSafe for LPDMA1

Blanket Implementations§

impl<T> Any for T
where T: 'static + ?Sized,

fn type_id(&self) -> TypeId

Gets the TypeId of self. Read more

impl<T, I> Binding<I, NoHandler<I>> for T
where T: Copy, I: Interrupt,

impl<T> Borrow<T> for T
where T: ?Sized,

fn borrow(&self) -> &T

Immutably borrows from an owned value. Read more

impl<T> BorrowMut<T> for T
where T: ?Sized,

fn borrow_mut(&mut self) -> &mut T

Mutably borrows from an owned value. Read more

impl<T> CloneToUninit for T
where T: Clone,

unsafe fn clone_to_uninit(&self, dest: *mut u8)

🔬This is a nightly-only experimental API. (clone_to_uninit)

Performs copy-assignment from self to dest. Read more

impl<T> From<T> for T

fn from(t: T) -> T

Returns the argument unchanged.

impl<T, U> Into<U> for T
where U: From<T>,

fn into(self) -> U

Calls U::from(self).

That is, this conversion is whatever the implementation of From<T> for U chooses to do.

impl<T, U> TryFrom<U> for T
where U: Into<T>,

type Error = !

The type returned in the event of a conversion error.

fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>

Performs the conversion.

impl<T, U> TryInto<U> for T
where U: TryFrom<T>,

type Error = <U as TryFrom<T>>::Error

The type returned in the event of a conversion error.

fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>

Performs the conversion.