Enum B 

pub enum B {}

Sub-block B.

Trait Implementations

impl Dma<SAI1, B> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI1, B> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH0

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH8

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH9

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH10

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH11

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH12

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH13

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH14

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Dma<SAI2, B> for GPDMA1_CH15

fn request(&self) -> Request

Get the DMA request number needed to use this channel as Dma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl FsPin<SAI1, B> for PA14

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl FsPin<SAI1, B> for PA4

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl FsPin<SAI1, B> for PB6

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl FsPin<SAI1, B> for PE9

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl FsPin<SAI2, B> for PA15

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as FsPin.

impl MclkPin<SAI1, B> for PB4

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MclkPin.

impl MclkPin<SAI1, B> for PE10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MclkPin.

impl MclkPin<SAI2, B> for PC11

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MclkPin.

impl SckPin<SAI1, B> for PB3

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin.

impl SckPin<SAI1, B> for PE8

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin.

impl SckPin<SAI2, B> for PC10

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin.

impl SdPin<SAI1, B> for PA13

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdPin.

impl SdPin<SAI1, B> for PB5

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdPin.

impl SdPin<SAI1, B> for PE7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdPin.

impl SdPin<SAI2, B> for PC12

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SdPin.

impl SubBlockInstance for B