Struct TIM16

pub struct TIM16 { /* private fields */ }

TIM16 peripheral

Implementations

impl TIM16

pub unsafe fn steal() -> Self

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl AdvancedInstance1Channel for TIM16

type CommunicationInterrupt = TIM16

Communication interrupt for this timer.

type BreakInputInterrupt = TIM16

Break input interrupt for this timer.

impl BreakInputPin<TIM16> for PB5

fn af_num(&self) -> u8

Get the AF number needed to use this pin as BreakInputPin

impl Ch1Dma<TIM16> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Ch1Dma<TIM16> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asCh1Dma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl Channel1ComplementaryPin<TIM16> for PB6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1ComplementaryPin

impl Channel1Pin<TIM16> for PA6

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl Channel1Pin<TIM16> for PB8

fn af_num(&self) -> u8

Get the AF number needed to use this pin as Channel1Pin

impl CoreInstance for TIM16

const BITS: TimerBits = TimerBits::Bits16

Amount of bits this timer has.

type UpdateInterrupt = TIM16

Update Interrupt for this timer.

fn regs() -> *mut ()

Registers for this timer.

impl GeneralInstance1Channel for TIM16

type CaptureCompareInterrupt = TIM16

Capture compare interrupt for this timer.

impl GeneralInstance2Channel for TIM16

type TriggerInterrupt = TIM16

Trigger event interrupt for this timer.

impl Peripheral for TIM16

type P = TIM16

Peripheral singleton type

unsafe fn clone_unchecked(&self) -> Self::P

Unsafely clone (duplicate) a peripheral singleton.

fn into_ref<'a>(self) -> PeripheralRef<'a, Self::P>

where Self: 'a,

Convert a value into a PeripheralRef.

impl UpDma<TIM16> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl UpDma<TIM16> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel asUpDma Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

impl AdvancedInstance2Channel for TIM16

impl AdvancedInstance4Channel for TIM16

impl BasicInstance for TIM16

impl BasicNoCr2Instance for TIM16

impl GeneralInstance4Channel for TIM16

impl RccPeripheral for TIM16