Struct SUBGHZSPI 

pub struct SUBGHZSPI { /* private fields */ }

SUBGHZSPI peripheral

Implementations

impl SUBGHZSPI

pub const unsafe fn steal() -> Peri<'static, Self>

Unsafely create an instance of this peripheral out of thin air.

Safety

You must ensure that you’re only using one instance of this type at a time.

Trait Implementations

impl Clone for SUBGHZSPI

fn clone(&self) -> Self

Returns a duplicate of the value.

fn clone_from(&mut self, source: &Self)

Performs copy-assignment from source.

impl CsPin<SUBGHZSPI> for PA4

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as CsPin.

impl Debug for SUBGHZSPI

fn fmt(&self, f: &mut Formatter<'_>) -> Result

Formats the value using the given formatter.

impl Format for SUBGHZSPI

where (): Format,

fn format(&self, f: Formatter<'_>)

Writes the defmt representation of self to fmt.

impl MisoPin<SUBGHZSPI> for PA6

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MisoPin.

impl MosiPin<SUBGHZSPI> for PA7

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as MosiPin.

impl RxDma<SUBGHZSPI> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl RxDma<SUBGHZSPI> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as RxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl SckPin<SUBGHZSPI> for PA5

Available on non-afio only.

fn af_num(&self) -> u8

Get the AF number needed to use this pin as SckPin.

impl TxDma<SUBGHZSPI> for DMA1_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA1_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA1_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA1_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA1_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA1_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA1_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA2_CH1

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA2_CH2

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA2_CH3

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA2_CH4

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA2_CH5

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA2_CH6

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl TxDma<SUBGHZSPI> for DMA2_CH7

fn request(&self) -> Request

Get the DMA request number needed to use this channel as TxDma. Note: in some chips, ST calls this the “channel”, and calls channels “streams”. embassy-stm32 always uses the “channel” and “request number” names.

fn remap(&self)

Remap the DMA channel

impl Copy for SUBGHZSPI

impl Instance for SUBGHZSPI

impl PeripheralType for SUBGHZSPI

impl RccPeripheral for SUBGHZSPI